47 The scaled image size (%lg x %lg mm) is larger than the target paper size (%lg x %lg mm).\n\nYou should reduce the scaling factor or the size of the printed area.
48 Load %s Setup File
49 Save %s Setup File
50 Ambiguous plotter type name %s.\nUsing default %s.
51 Unknown plotter type name %s.\nUsing default %s.
52 %s is corrupt!
53 Bad version number of the %s file!
54 &Files in directory:
55 View for &info:
56 Save %s options to
57 %s options successfully saved to\n%s
58 N/A
60 An UNREGISTERED COPY is available for the HP-GL/2, HP7475A, HP DraftMaster and Roland DXY plotters. The versions for other plotter types can be received only on the basis of the regular registration.\n\n^
61 Would you like to get info about How to register?
76 Cannot write to file\n"%s"!\nFile is probably read-only or opened by another process.
77 Error count exceeds %d, stopping reporting.
78 Warning count exceeds %d, stopping reporting.
79 There was reported %d errors and %d warnings.
80 %s done in %lu.%lu sec.
81 The drawing area cannot be enlarged %lg times due to memory or system limitation.\n\nDo you want to find maximum possible zoom factor?\n\nNotice: creating of very large bitmap may overload your system if it uses virtual memory.
82 Sorry, cannot find maximum zoom factor.
83 Maximum zoom factor (%lg) found!
84 Export aborted because of new paper size was defined by PS instruction and it differs from the starting paper size.\nYou should restart export once again.
85 Print aborted because of new paper size was defined by PS instruction and it differs from the starting paper size.\nYou should restart print once again.
86 Sorry, cannot establish maximum visible %s zoom because of system/memory limitation.
87 horizontal
88 vertical
89 Plotter state: %Fs syntax, %lg mm unit size
90 Cannot open %s file\n"%s"
91 Pen Colors Definitions
92 Pen Widths Definitions
93 Load %s
94 Save %s
95 Cannot read from file\n"%s"!\nFile is probably opened by another process.
96 No %s found in file\n"%s"
97 Pen Colors [%s]
98 Default Pen Colors [%s]
99 Pen Widths [%s]
100 Paper Size [%s]
101 Pen Plotter Simulator 32-bit V%X.%02X%s
102 Date of expiration: %s
103 Sorry, this %s version of the SPLOT program has expired.
104 Warning, file "%s" does not contain any 'Enter HP-GL/2 Mode' instruction and you have configured the HP-GL/2 driver to run in Dual-Context mode. In this mode the drawing is started in PCL mode. However the Splot program ignores all ^
105 PCL instructions and searches for HP-GL/2 code only.\nIf the "%s" file is really HP-GL or HP-GL/2 file, it must contain 'Enter HP-GL/2 Mode' instruction to be viewed in Dual-Context mode.
106 Warning, file "%s" contains HP-GL/2 instructions.\nGo to the Options menu and select Plotter Type -> HP-GL/2 Pen Plotter or HP-GL/2 Raster Device.
107 Warning, file "%s" seems to be designed for HP-GL/2 raster device.\nGo to the Options menu and select Plotter Type -> HP-GL/2 Raster Device.
108 Warning, file "%s" contains PE (Polyline Encoded) instruction.\nThis instruction is supported only by HP-GL/2 devices or by HP DraftPro DXL/EXL plotters.\n
109 Go to the Options menu and select Plotter Type -> HP-GL/2 Pen Plotter or HP-GL/2 Raster Device or HP DraftPro DXL/EXL.
1001 unknown instruction
1002 invalid instruction mnemonics
1003 instruction not supported by current driver configuration
1004 unknown escape sequence
1005 unknown instruction or instruction not supported in polygon mode
1006 instruction not supported in polygon mode for current driver configuration
1007 instruction ignored in picture body state - use it before any drawing instruction